最新91午夜福利在线_久久狠狠躁夜夜av麻豆_欧美色图一区_一区二区中文字幕免费视频_欧美在线一级成人A视频_少妇裸体婬交免费观看_中文国产字幕在线日韩6页_福利片免费 亚洲_亚洲国产精品啪啪视频_成人亚洲欧美

NC automatic feeding machine is an advanced automation equipment, but there are certain limitations in adapting to material types and specifications.

1、 Material type restrictions

Metallic materials

For common metal materials such as steel, including carbon steel, alloy steel, etc., NC automatic feeders can usually adapt well. However, when the hardness of metal materials is extremely high, such as some special hard alloys, it may cause significant wear on the feeding rollers and other components of the feeding machine. For example, tungsten steel has a high hardness, and without proper protection and feeding force control during the feeding process, it may damage key components of the feeding machine.

For metal sheets, such as aluminum foil with a thickness of 0.1-0.5mm, the feeding machine needs to have a precise tension control device. Because metal sheets are prone to wrinkling or tearing during the feeding process. If the feeder does not have a high-precision tension adjustment system, it is difficult to ensure stable feeding.

Non metallic materials

When adapting plastic materials, it is easier to feed common plastics such as polyvinyl chloride (PVC) and polypropylene (PP) rods or sheets. However, for some sticky plastics, such as soft polyurethane (PU) materials, adhesion may occur. This will result in inaccurate feeding and material blockage in the feeding channel.

For fiber materials such as carbon fiber, glass fiber, etc. If it is a carbon fiber bundle, factors such as its diameter and strength will affect the feeding. If the diameter of the carbon fiber bundle is too small, the clamping device of the feeding machine may not be able to accurately grasp it; If the strength is too high, fiber breakage may occur during the feeding process due to a small bending radius.

2、 Material specification limitations

In terms of size

In terms of length, generally speaking, NC automatic feeders need to consider the issue of material self weight sagging when feeding longer materials (such as metal pipes with a length exceeding 5 meters). If there is no suitable auxiliary support device, the feeding accuracy will be greatly affected.

When the width and thickness of the material are too large (such as exceeding 1.5 times the width of the feeding port of the feeder), the material cannot enter the feeding channel normally. For materials that are too thin (such as thin films with a thickness less than 0.05mm), the feeding accuracy of the feeding machine is required to be extremely high, otherwise feeding deviation is prone to occur.

In terms of shape

For materials with regular shapes, such as circular bars and square profiles, the feeding machine can adapt relatively stably. However, for irregularly shaped materials such as castings with complex curved surfaces or irregular contours, the clamping device of the feeding machine may not be able to fit the material surface well, thereby affecting the stability and accuracy of the feeding.

In summary, NC automatic feeding machines have many limitations in adapting to material types and specifications. In practical applications, it is necessary to select and adjust the parameters of the feeding machine reasonably based on specific material characteristics and processing requirements.